模式控制

电源

Name Code Control Query Standby Power On
Power 0x00 Yes Yes Enable Enable
Range/Switch Code
Length
(Including Check Sum)		 byte0: byte1: byte2-n: Notes
Syntax Code Syntax Code Syntax&code
0x02 OFF 0x00 [1]
0x02 ON 0x01 [2]

[1]: OFF is always set to Enable.
[2]: ON is set to Enable when the Standby Command (0x02) receives Enable (0x01).

待机

Name Code Control Query Standby Power On
Standby 0x01 Yes No Disable Enable
Range/Switch Code
Length
(Including Check Sum)		 byte0: byte1: byte2-n: Notes
Syntax Code Syntax Code Syntax&code
0x02 Disable 0x00 [3]
0x02 Enable 0x01

[3]: The Disable command only works via CBX.

输入选择

Name Code Control Query Standby Power On
Input Select 0x02 Yes Yes Disable Enable
Range/Switch Code
Length
(Including Check Sum)		 byte0: byte1: byte2-n: Notes
Syntax Code Syntax Code Syntax&code
0x02 Toggle 0x00 [4]
0x03 Video / SCART 0x02 #1 0x01 [5]
#2 0x02
#3 0x03
0x03 Component 0x03 #1 0x01
#2 0x02
#3 0x03
0x03 HDMI 0x04 #1 0x01
#2 0x02
#3 0x03
#4 0x04
#5 0x05
0x03 PC 0x05 #1 0x01
0x03 Shared Input 0x07 #1 0x01

[4]: Selects the same input as the RC.
[5]: Values which are supported are defined for each regional spec.

音量控制

Name Code Control Query Standby Power On
Volume Control 0x05 Yes Yes Disable Enable
Range/Switch Code
Length
(Including Check Sum)		 byte0: byte1: byte2-n: Notes
Syntax Code Syntax Code Syntax&code
0x03 Up/Down 0x00 Up 0x00
Down 0x01
0x03 Direct 0x01 Values 0xXX [6]

[6]: Values which are supported are defined for each regional spec.

静音

Name Code Control Query Standby Power On
Muting 0x06 Yes Yes Disable Enable
Range/Switch Code
Length
(Including Check Sum)		 byte0: byte1: byte2-n: Notes
Syntax Code Syntax Code Syntax&code
0x02 Toggle 0x00 [7]
0x03 Direct 0x01 Unmuting 0x00
Muting 0x01

[7]: Values in the cycle: Unmuting/Muting.

语言

Name Code Control Query Standby Power On
Language 0x07
Range/Switch Code
Length
(Including Check Sum)		 byte0: byte1: byte2-n: Notes
Syntax Code Syntax Code Syntax&code
0x05 Reserved 0x00 Please refer to Languages [8]

[8]: Lowercase Letter: ISO639-2 3-byte Language Code.
Uppercase Letter(ex: "CHT" "CHS"): Sony's internal definition.

关闭定时器(睡眠)

Name Code Control Query Standby Power On
Off Timer (SLEEP) 0x0C Yes No Disable Enable
Range/Switch Code
Length
(Including Check Sum)		 byte0: byte1: byte2-n: Notes
Syntax Code Syntax Code Syntax&code
0x02 Toggle 0x00 [9]
0x03 Direct 0x01 Timer Offset 0xXX [10]

[9]: Values in the cycle are defined for each regional spec.
[10]: 0-255, values which are supported are defined for each regional spec.

图片关闭

Name Code Control Query Standby Power On
Picture OFF 0x0D Yes No Disable Enable
Range/Switch Code
Length
(Including Check Sum)		 byte0: byte1: byte2-n: Notes
Syntax Code Syntax Code Syntax&code
0x02 Toggle 0x00 [11]
0x03 Direct 0x01 OFF 0x00
ON 0x01

[11]: Values in the cycle are defined for each regional spec.

显示

Name Code Control Query Standby Power On
Display 0x0F Yes No Disable Enable
Range/Switch Code
Length
(Including Check Sum)		 byte0: byte1: byte2-n: Notes
Syntax Code Syntax Code Syntax&code
0x02 Toggle 0x00 [12]

[12]: Same as the display (info) key.

Last modified: 16 Nov 2021