ホーム > 開発 > シリアルコントロール (RS232C制御) > コマンド定義
Screen
H Shift
| Name | Code | Control | Query | Standby | Power On |
|---|---|---|---|---|---|
| H Shift | 0x41 | Yes | No | Disable | Enable |
| Length (Including Check Sum) |
byte0: | byte1: | byte2-n: | Notes | |||
| Syntax | Code | Syntax | Code | Syntax&code | |||
| 0x03 | Up/Down | 0x00 | Up | 0x00 | [1] | ||
| Down | 0x01 | ||||||
| 0x04 | Direct | 0x01 | Plus | 0x00 | Values | 0xnn | |
| Minus | 0x01 | ||||||
[1]: Values which are supported are defined for each regional spec.
V Size
| Name | Code | Control | Query | Standby | Power On |
|---|---|---|---|---|---|
| V Size | 0x42 | Yes | No | Disable | Enable |
| Length (Including Check Sum) |
byte0: | byte1: | byte2-n: | Notes | |||
| Syntax | Code | Syntax | Code | Syntax&code | |||
| 0x03 | Up/Down | 0x00 | Up | 0x00 | [2] | ||
| Down | 0x01 | ||||||
| 0x04 | Direct | 0x01 | Plus | 0x00 | Values | 0xnn | |
| Minus | 0x01 | ||||||
[2]: Values which are supported are defined for each regional spec.
V Shift
| Name | Code | Control | Query | Standby | Power On |
|---|---|---|---|---|---|
| V Shift | 0x43 | Yes | No | Disable | Enable |
| Length (Including Check Sum) |
byte0: | byte1: | byte2-n: | Notes | |||
| Syntax | Code | Syntax | Code | Syntax&code | |||
| 0x03 | Up/Down | 0x00 | Up | 0x00 | [3] | ||
| Down | 0x01 | ||||||
| 0x04 | Direct | 0x01 | Plus | 0x00 | Values | 0xnn | |
| Minus | 0x01 | ||||||
[3]: Values which are supported are defined for each regional spec.
Wide
| Name | Code | Control | Query | Standby | Power On |
|---|---|---|---|---|---|
| Wide | 0x44 | Yes | No | Disable | Enable |
| Length (Including Check Sum) |
byte0: | byte1: | byte2-n: | Notes | |||
| Syntax | Code | Syntax | Code | Syntax&code | |||
| 0x02 | Toggle | 0x00 | [4] | ||||
| 0x03 | Direct | 0x01 | Wide Zoom | 0x00 | |||
| Full | 0x01 | ||||||
| Zoom | 0x02 | ||||||
| Normal | 0x03 | ||||||
| PC_Normal | 0x05 | ||||||
| PC_Full1 | 0x06 | ||||||
| PC_Full2 | 0x07 | ||||||
[4]: Values in the cycle are defined for each regional spec.
Auto Wide
| Name | Code | Control | Query | Standby | Power On |
|---|---|---|---|---|---|
| Auto Wide | 0x45 | Yes | No | Disable | Enable |
| Length (Including Check Sum) |
byte0: | byte1: | byte2-n: | Notes | |||
| Syntax | Code | Syntax | Code | Syntax&code | |||
| 0x02 | Toggle | 0x00 | |||||
| 0x03 | Direct | 0x01 | OFF | 0x00 | |||
| ON | 0x01 | ||||||
4:3 Mode
| Name | Code | Control | Query | Standby | Power On |
|---|---|---|---|---|---|
| 4:3 Mode | 0x46 | Yes | No | Disable | Enable |
| Length (Including Check Sum) |
byte0: | byte1: | byte2-n: | Notes | |||
| Syntax | Code | Syntax | Code | Syntax&code | |||
| 0x02 | Toggle | 0x00 | [5] | ||||
| 0x03 | Direct | 0x01 | Normal | 0x04 | |||
| Wide Zoom | 0x03 | ||||||
| Off | 0x00 | ||||||
[5]: Values in the cycle are defined for each regional spec.
Last modified: 30 Jul 2024