Wall Mount

[1]: Not available depending on the country / region. To get more info, please visit product site external link.

[2]: If you use SU-WL500, the following are necessary.

• Spacer: a washer with an outside diameter of 18 mm, inside diameter of 10 mm, and thickness of 2 mm (SONY Part Number 7-688-000-32) × 20
• Screw: PSW M6 × 25 mm (SONY Part Number 4-577-326-01) × 4 (1 pk)

SU-WL500

Be sure to read thoroughly the all safety information described in the instruction manual of SU-WL500.
Do NOT use SU-WL450 for installation in the way noted in the manual.

Provide adequate clearances around the display.

The following illustration shows how much space is required around the display. Be sure to install the display in the orientation shown in the following illustration.

* Only on limited region/country/LCD Display model.
Even if Portrait is installed, the image is not rotated.

Do not block the ventilation holes of the display.

If you block the ventilation holes with tapes or other objects, heat builds up inside the display and may cause a fire.

Others

• Third party wall mounts may be used screw placement dimensions meet the required conditions. For details, please see the user manual of BZ35F Series. Use and safety is not guaranteed by Sony and much be checked with the supplier.

• If you cover the illumination LED and its surroundings with tapes or other objects, the status of the display cannot be recognized and the remote control may not work.

• When carrying the display, hold it in landscape orientation, and take care not to drop it when installing. Do not apply excessive force to the display; otherwise, it may be deformed.

• Operating temperature: 35℃ and lower (Installation type A to D)

Downloads