Home > Resources > Software: Corporate / Education > Display Power Management > User Guide

5. Using the application

Estimated reading time: 1 minute

5.1. Setting Time

This application runs based on the time zone of the server PC.
Please note that the time of the display is not used.

5.2. Setting of BRAVIA

  1. Please change the mode to ‘Pro settings mode’.
    • The method of change mode of display is written in BRAVIA B2B technical manual.
  2. Please change following settings.
    • Settings Network Home network setup IP Control Authentication
      Please set to ‘None’.
    • Settings Network Home network setup IP Control Simple IP Control
      Please set to ‘enable’.
  3. Please change the mode to ‘Pro mode’.

5.3. Setting of Data Projector

  1. Open web browser.

  2. Set IP address of projector to URL. (http://xxx.xxx.xxx)

  3. Set PJ Talk as below.

    • [Community]: SONY
    • [PORT]: 53484