Setting Specs (BZ series: L / J / H)
Target model
BZ53L, BZ40L, BZ35L, BZ30L, BZ50L, BZ40J, BZ35J, BZ30J, BZ40H
Supported firmware version
Android TV OS 10: 6.7283 or later, below 6.8000
Android TV OS 12: 6.8000 or later
Documentation
document Version: 2.1.0, schemaVersion: 2.0.0
Basic settings
RS-232C
| Setting Item | Type / Default | Parameter Value |
|---|---|---|
| RS-232C Control Setting ID: rs232c-control | Type: Enum Default: Standard | “Off”: Off “Standard”: Via HDMI port “VDA”: Via serial port |
HDMI
X: Enter HDMI input number
| Android TV OS | Setting / ID | Type / Default | Parameter Value | Conditions / Notes | Supported Model | ||||
|---|---|---|---|---|---|---|---|---|---|
| 10 | 12 | HDMI1 | HDMI2 | HDMI3 | HDMI4 | ||||
| 〇 | 〇 | Picture mode Setting ID: picture-mode-hdmiX | Type: Enum Default: Standard | Vivid, Standard, Cinema, Game, Graphics, Photo, Custom | Vivid, Standard, Cinema, Game, Graphics, Photo, Custom | Vivid, Standard, Cinema, Game, Graphics, Photo, Custom | Vivid, Standard, Cinema, Game, Graphics, Photo, Custom | It may increase power consumption | BZ53L, BZ40L, BZ35L, BZ30L, BZ50L, BZ40J, BZ35J, BZ30J, BZ40H |
| 〇 | 〇 | Auto picture mode Setting ID: auto-picture-mode- enabled-hdmiX | Type: Boolean Default: false | true / false | true / false | true / false | true / false | “true” may increase power consumption | BZ53L, BZ40L, BZ35L, BZ30L, BZ50L, BZ40J, BZ35J, BZ30J, BZ40H |
| 〇 | 〇 | Light Sensor*1 Setting ID: light-sensor-enabled- hdmiX | Type: Boolean Default: true | true / false | true / false | true / false | true / false | ”false” may increase power consumption | BZ40L, BZ35L, BZ30L, BZ35J, BZ30J, BZ40H, |
| 〇 | 〇 | Light sensor*1 Setting ID: ambient-light-sensor- enabled-hdmiX | Type: Boolean Default: true | true / false | true / false | true / false | true / false | ”false” may increase power consumption | BZ50L, BZ30L(98inch), BZ53L, BZ40J |
| 〇 | 〇 | Auto luminance level Setting ID: ambient-light-sensor-light- enabled-hdmiX | Type: Boolean Default: true | true / false | true / false | true / false | true / false | ・”false” may increase power consumption ・It is available when ambient-light-sensor-enabled-hdmiX=”true” | BZ53L, BZ40L, BZ35L, BZ30L, BZ50L, BZ40J, BZ35J, BZ30J, BZ40H |
| 〇 | 〇 | Auto tone curve Setting ID: ambient-light-sensor-gamma- enabled-hdmiX | Type: Boolean Default: true | true / false | true / false | true / false | true / false | ・”false” may increase power consumption ・It is available when ambient-light-sensor-enabled-hdmiX=”true” | BZ53L, BZ30L(98inch), BZ50L, BZ40J |
| 〇 | 〇 | Brightness Setting ID: brightness-hdmiX | Type: Number Default: 35 | Range: 0-50 Step: 1 | Range: 0-50 Step: 1 | Range: 0-50 Step: 1 | Range: 0-50 Step: 1 | “0” may increase power consumption | BZ53L, BZ40L, BZ35L, BZ30L, BZ50L, BZ40J, BZ35J, BZ30J, BZ40H |
*1 Set the light sensor value according to the target model.
Video
X: Enter Video input number
| Setting Item | Type / Default | Parameter Value | Conditions / Notes | Supported Model | |
|---|---|---|---|---|---|
| Video1 | Video2 | ||||
| Picture mode Setting ID: picture-mode-videoX | Type: Enum Default: Standard | Vivid, Standard, Cinema, Game, Custom | Vivid, Standard, Cinema, Game, Custom | It may increase power consumption. | BZ53L, BZ40L, BZ35L, BZ30L, BZ50L, BZ40J, BZ35J, BZ30J, BZ40H |
| Light sensor Setting ID: light-sensor-enabled-videoX | Type: Boolean Default: true | true / false | true / false | “false” may increase power consumption. | BZ40L, BZ35L, BZ30L, BZ30J, BZ35J, BZ40H |
| Light sensor Setting ID: ambient-light-sensor-enabled-videoX | Type: Boolean Default: true | true / false | true / false | ・”false” may increase power consumption. ・If ambient-light-sensor-enabled-video1 = “true”, when importing, the following must also be imported: – enabled-videoX – ambient-light-sensor-gamma-enabled-videoX | BZ50L, BZ30L(98inch), BZ53L, BZ40J |
| Auto luminance level Setting ID: ambient-light-sensor-light- enabled-videoX | Type: Boolean Default: true | true / false | true / false | ・It is available when ambient-light-sensor- enabled-video1=”true” ・”false” may increase power consumption. ・When importing, ambient-light-sensor- enabled-videoX must also be imported. | BZ50L, BZ30L(98inch), BZ53L, BZ40J |
| Auto tone curve Setting ID: ambient-light-sensor-gamma- enabled-videoX | Type: Boolean Default: true | true / false | true / false | ・It is available when ambient-light-sensor-enabled-video1=”true”. ・”false” may increase power consumption. ・When importing, ambient-light-sensor- enabled-videoX must also be imported. | BZ50L, BZ30L(98inch), BZ53L, BZ40J |
| Brightness Setting ID: brightness-videoX | Type: Number Default: 35 | Range: 0-50 Step: 1 | Range: 0-50 Step: 1 | ”0”may increase power consumption. | BZ53L, BZ40L, BZ35L, BZ30L, BZ50L, BZ40J, BZ35J, BZ30J, BZ40H |
App Video
X: Enter app type (lowercase)
| Setting Item | Type / Default | Parameter Value | Conditions / Notes | Supported Model | |||
|---|---|---|---|---|---|---|---|
| Video App (video) | Photo App (photo) | Game App (game) | General App (general) | ||||
| Picture mode Setting ID: picture-mode-app-X | Type: Enum Default: Standard *photo only for app-photo | Vivid, Standard, Cinema, Custom | Photo only (fixed) | Game, Graphics | Vivid, Standard, Cinema, Game, Graphics, Photo, Custom | It may increase power consumption when set to the following: “Vivid”, “Standard”, “Cinema”, “Custom” | BZ40L, BZ35L, BZ30L, BZ30J, BZ35J, BZ40H |
| App Light Sensor Setting ID: light-sensor-enabled-app-X | Type: Boolean Default: true | true / false | true / false | true / false | true / false | “false” may increase power consumption. | BZ40L, BZ35L, BZ30L, BZ30J, BZ35J, BZ40H |
| App Ambient Light Sensor Setting ID: ambient-light-sensor-enabled- app-X | Type: Boolean Default: true | true / false | true / false | true / false | true / false | ・”false” may increase power consumption. ・If ambient-light-sensor-enabled-app-video = “true”, when importing, the following must also be imported: – ambient-light-sensor-light-enabled-app-X – ambient-light-sensor-gamma-enabled-app-X | BZ40L, BZ35L, BZ30L, BZ30J, BZ35J, BZ40H |
| Auto luminance level Setting ID: ambient-light-sensor-light- enabled-app-X | Type: Boolean Default: true | true / false | true / false | true / false | true / false | ・It is available when ambient-light- sensor-enabled-app-video=”true”. ・”false” may increase power consumption. ・When importing, ambient-light-sensor-enabled-app-X must also be imported. | BZ50L, BZ30L(98inch), BZ53L, BZ40J |
| Auto tone curve Setting ID: ambient-light-sensor- gamma-enabled-app-X | Type: Boolean Default: true | true / false | true / false | true / false | true / false | ・It is available when ambient-light-sensor-enabled-app-video=”true”. ・”false” may increase power consumption. ・When importing, ambient-light-sensor- enabled-app-X must also be imported. | BZ50L, BZ30L(98inch), BZ53L, BZ40J |
| Brightness Setting ID: brightness-app-X | Type: Number Default: 35 | Range: 0-50 Step: 1 | Range: 0-50 Step: 1 | Range: 0-50 Step: 1 | Range: 0-50 Step: 1 | ”0”may increase power consumption | BZ40L, BZ35L, BZ30L, BZ30J, BZ35J, BZ40H |
Network & Internet
Ethernet
| Android TV OS | Setting / ID | Type / Default | Parameter Value | Conditions / Notes | |
|---|---|---|---|---|---|
| 10 | 12 | ||||
| 〇 | 〇 | IP settings Setting ID: ip-assignment | Type: Enum Default: DHCP | “DHCP”: DHCP “Static”: Static | When importing, the following must also be imported: – If ip-assignment = “Static”: ipv4-address, ipv4-prefix-length – Required in all cases: proxy-enabled |
| 〇 | 〇 | IP address Setting ID: ipv4-address | Type: String Default: “192.168.1.128” | ^(\d{1,2}|1\d\d|2[0-4]\d|25[0-5]) \.(\d{1,2}|1\d\d|2[0-4]\d|25[0-5]) \.(\d{1,2}|1\d\d|2[0-4]\d|25[0-5]) \.(\d{1,2}|1\d\d|2[0-4]\d|25[0-5])$ | ・It is available when ip-assignment=”Static”. ・When importing, ip-assignment must also be imported. |
| 〇 | 〇 | Network prefix length Setting ID: ipv4-prefix-length | Type: Number Default: 24 | 8～32 | ・It is available when ip-assignment=”Static”. ・When importing, ip-assignment must also be imported. |
| 〇 | 〇 | Gateway Setting ID: ipv4-gateway | Type: String Default: “192.168.1.1” | ^(\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\. (\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\. (\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\. (\d{1,2}|1\d\d|2[0-4]\d|25[0-5])$ |^$ | ・It is available when ip-assignment=”Static”. ・When importing, ip-assignment must also be imported. |
| 〇 | 〇 | DNS Setting ID: wifi-ipv4-dns-servers | Type: String Default: “8.8.8.8,8.8.4.4” | ^(?:((?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\. (?:\d{1,2}| 1\d\d|2[0-4]\d|25[0-5])\.(?:\ d{1,2}|1\d\d|2[0-4]\d| 25[0-5])\.(?:\d{1,2} |1\d\d|2[0-4]\d|25[0-5]))(?:,((?: \d{1,2}|1\ d\d|2[0-4]\d|25[0-5])\.(?:\d{1,2}|1\d\d|2[0 -4]\d|25[0-5])\.(?:\d{1,2}|1\d\d|2[0-4]\d| 25[0-5])\. (?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])))?)?$|^$ | ・It is available when ip-assignment=”Static”. ・When importing, ip-assignment must also be imported. |
| 〇 | 〇 | Proxy settings Setting ID: proxy-enabled | Type: Enum Default: None | “None”: None “Static”: Manual | When importing, the following must also be imported: – If ip-assignment = “Static”: proxy-host, proxy-port – Required in all cases: ip-assignment |
| 〇 | 〇 | Proxy hostname Setting ID: proxy-host | Type: String Default: “proxy.example.com” | ^.+$ | ・It is available when ip-assignment=”Static”. ・When importing, this setting item, proxy- enabled must also be imported. |
| 〇 | 〇 | Proxy port Setting ID: proxy-port | Type: Number Default: 8080 | 1～65535 Step: 1 | ・It is available when ip-assignment=”Static”. ・When importing, proxy-enabled must also be imported. |
| 〇 | 〇 | Bypass proxy for Setting ID: wifi-enabled | Type: Boolean Default: false | N/A | ・It is available when proxy-enabled=”Static”. ・When importing, proxy-enabled must also be imported. |
Wi-Fi
| Android TV OS | Setting / ID | Type / Default | Parameter Value | Conditions / Notes | |
|---|---|---|---|---|---|
| 10 | 12 | ||||
| 〇 | 〇 | Wi-Fi Setting ID: wifi-enabled | Type: Boolean Default: false | true / false | N/A |
| 〇 | 〇 | Network name Setting ID: wifi-ssid | Type: String Default: “” | 1～32 | ・It cannot read device setting values. ・It is available when wifi-enabled=”true”. ・When importing, the following must also be imported: – wifi-security – wifi-ip-assignment – wifi-proxy-enabled |
| 〇 | 〇 | Security Setting ID: wifi-security | Type: Enum Default: None | “None”: None “Wep”: WEP “Wpa”: WPA/WPA2 PSK | ・It cannot read device setting values. ・It is available when wifi-enabled=”true”. ・When importing, the following must also be imported: – wifi-ssid – wifi-ip-assignment – wifi-proxy-enabled – If wifi-security = “Wep”: wifi-wep-value – If wifi-security = “Wpa”: wifi-wpa-value |
| 〇 | 〇 | Password Setting ID: wifi-wep-value | Type: Password Default: “” | ^[\x20-\x7E]+$ | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-security=”Wep. ・When importing, wifi-security must also be imported. |
| 〇 | 〇 | Password Setting ID: wifi-wpa-value | Type: Password Default: “” | 8～63 Format: ^[\x20-\x7E]+$ | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-security=”Wpa”. ・When importing, wifi-security must also be imported. |
| 〇 | 〇 | Connect Setting ID: wifi-connected | Type: Boolean Default: true | true / false | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-security=”Wep”. ・When importing,wifi-security must also be imported. |
| 〇 | 〇 | IP settings Setting ID: wifi-ip-assignment | Type: Enum Default: DHCP | “DHCP”: DHCP “Static”: Static | ・It cannot read device setting values. ・It is available when wifi-enabled=”true”. ・When importing, the following must also be imported: – If wifi-ip-assignment = “Static: wifi-ipv4-address, wifi-ipv4-prefix-length – Required in all cases: wifi-ssid, wifi-security, wifi-proxy-enabled |
| 〇 | 〇 | IP address Setting ID: wifi-ipv4-address | Type: String Default: “192.168.1.128” | ^(\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5])$ | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-ip-assignment=”Static”. ・When importing, proxy-enabled must also be imported. |
| 〇 | 〇 | Network prefix length Setting ID: wifi-ipv4-prefix-length | Type: Number Default: 24 | 8～32 Step: 1 | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-ip-assignment=”Static”. ・When importing, wifi-ip-assignment must also be imported. |
| 〇 | 〇 | Gateway Setting ID: wifi-ipv4-gateway | Type: String Default: “192.168.1.1” | ^(\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5])$|^$ | ・It cannot read device setting values. ・it is available when wifi-enabled=”true” and wifi-ip-assignment=”Static”. ・When importing, wifi-ip-assignment must also be imported. |
| 〇 | 〇 | DNS Setting ID: wifi-ipv4-dns-servers | Type: String Default: “8.8.8.8,8.8.4.4” | ^(?:((?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (?:\d{1,2}| 1\d\d|2[0-4]\d|25[0-5]). (?:\d{1,2}|1\d\d|2[0-4]\d| 25[0-5]). (?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])) (?:,((?: \d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (?:\d{1,2}|1\d\d|2[0 -4]\d|25[0-5]). (?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])))?)?$|^$ | ・Up to two entries can be specified. If two, use “,” separator. ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-ip-assignment=”Static”. ・When importing, wifi-ip-assignment must also be imported. |
| 〇 | 〇 | Proxy settings Setting ID: wifi-proxy-enabled | Type: Enum Default: None | “None”: None “Static”: Manual | ・It cannot read device setting values. ・It is available when wifi-enabled=”true”. ・When importing, the following must also be imported: – If wifi-proxy-enabled = “Static”: wifi-proxy-host, wifi-proxy-port – Required in all cases: wifi-ssid, wifi-security, wifi-ip-assignment |
| 〇 | 〇 | Proxy hostname Setting ID: wifi-proxy-host | Type: String Default: “proxy.example.com” | ^.+$ | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-proxy-enabled=”Static”. ・When importing, wifi-proxy-enabled must also be imported. |
| 〇 | 〇 | Proxy port Setting ID: wifi-proxy-port | Type: Number Default: 8080 | 1～65535 Step: 1 | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-proxy-enabled=”Static”. ・When importing, wifi-proxy-enabled must also be imported. |
| × | 〇 | Bypass proxy for Setting ID: wifi-proxy-exclusive- list | Type: String Default: “example.com,mycomp. test.com,localhost” | true / false | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-proxy-enabled=”Static” ・When importing, wifi-proxy-enabled must also be imported. |
IP control
* Supported with firmware version 6.7283 or later
| Android TV OS | Setting / ID | Type / Default | Parameter Value | Conditions / Notes | |
|---|---|---|---|---|---|
| 10* | 12 | ||||
| 〇 | 〇 | Authentication Setting ID: ip-control-authentication | Type: Enum Default: Normal | “Normal”: Normal “None”: None “PSK”: Pre-Shared Key “Normal PSK”: Normal and Pre-Shared Key | ・Firmware below 6.8088 do not include the ‘redda’ object. When using default values, set targetRegion=”false” and enforced=”false”. ・The available options, default values, and constraints are determined by the device attributes ‘targetRegion’ and ‘enforced’, which are contained in the ‘redda’ object returnedby the Cloud API “getDeviceInfo” endpoint. ・Only the following combinations of device attributes are valid: – targetRegion = “false” AND enforced = “false” – targetRegion = “true” AND enforced = “false” – targetRegion = “false” AND enforced = “false” – If targetRegion = “true” AND enforced = “true”: this functions as a Pre-Shared Key. In this case, the setting cannot be retrieved or configured, and the Cloud API returns “ID_NOT_FOUND”. |
| 〇 | 〇 | Pre-Shared Key Setting ID: ip-control-authentication-psk | Type: String Default: “” | 1～20 | Availability Condition It is available when the following: – ip-control-authentication = “PSK” – ip-control-authentication = “Normal PSK” Import Dependency When importing, ip-control-authentication must also be imported. Device Attribute Dependency The available options, default values, and constraints are determined by the device attributes ‘targetRegion’ and ‘enforced’, which are contained in the ‘redda’ object returned by the Cloud API “getDeviceInfo” endpoint. Valid Device Attribute Combinations Only the following combinations of device attributes are valid: – targetRegion = “false” AND enforced = “false” – targetRegion = “true” AND enforced = “false” – targetRegion = “true” AND enforced = “true” Operational Note For devices with targetRegion =”true” AND enforced = “true”, the character count must be between 16 and 20. |
| × | 〇 | Communication mode Setting ID: ip-control-communication-mode | Type: Enum Default: HTTP | “HTTP”: HTTP “HTTPS”: HTTPS | Device Attribute Dependency The available options, default values, and constraints are determined by the device attributes targetRegionand enforced, which are contained in the redda object returned by getDeviceInfo endpoint.Valid Device Attribute Combinations Only the following combinations of device attributes are valid: – targetRegion = “false” AND enforced = “false” – targetRegion = “true” AND enforced = “false” – targetRegion = “true” AND enforced = “true” Legacy Device Handling Firmware below 6.8088 does not include the redda object. For these devices, use the default values: targetRegion = “false” and enforced = “false” Operational Notes When targetRegion = “false” AND enforced = “false”, this setting operates as HTTP. When targetRegion = “true” AND enforced = “true”, this setting operates as HTTPS. In both cases above, this setting cannot be set or retrieved , ID_NOT_FOUND is returned. |
| 〇 | 〇 | Simple IP control Setting ID: simple-ip-control-enabled | Type: Boolean Default: false | true / false | This may increase power consumption more than the default configuration at the following values. “true” |
| × | 〇 | Control4® Setting ID: control4-enabled | Type: Boolean Default: false | true / false | N/A |
| × | 〇 | Control remotely Setting ID: remote-device-control-remotely | Type: Boolean Default: [enforced=false] true [targetRegion=true and enforced=true] false | true / false | ・The available options, default values, and constraints are determined by the device attributes targetRegion and enforced, which are contained in the redda object returned by getDeviceInfo endpoint. ・The following combinations of device attributes are valid. Other combinations do not occur in practice. – targetRegion = “false” AND enforced = “false” – targetRegion = “true”AND enforced = “false” – targetRegion = “true” AND enforced = “true” ・Firmware below 6.8088 does not include the redda object. When using default values, set targetRegion=”false” and enforced=”false”. |
| 〇 | 〇 | Security Setting ID: wifi-security | Type: Enum Default: None | “None”: None “Wep”: WEP “Wpa”: WPA/WPA2 PSK | ・It cannot read device setting values. ・It is available when wifi-enabled=”true”. ・When importing, the following must also be imported: – wifi-ssid – wifi-ip-assignment – wifi-proxy-enabled – If wifi-security = “Wep”: wifi-wep-value – If wifi-security = “Wpa”: wifi-wpa-value |
| 〇 | 〇 | Password Setting ID: wifi-wep-value | Type: Password Default: “” | ^[\x20-\x7E]+$ | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-security=”Wep. ・When importing, wifi-security must also be imported. |
| 〇 | 〇 | Password Setting ID: wifi-wpa-value | Type: Password Default: “” | 8～63 Format: ^[\x20-\x7E]+$ | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-security=”Wpa”. ・When importing, wifi-security mustalso be imported. |
| 〇 | 〇 | Connect Setting ID: wifi-connected | Type: Boolean Default: true | true / false | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-security=”Wep” ・When importing,wifi-security must also be imported. |
| 〇 | 〇 | IP settings Setting ID: wifi-ip-assignment | Type: Enum Default: DHCP | “DHCP”: DHCP “Static”: Static | ・It cannot read device setting values. ・It is available when wifi-enabled=”true”. ・When importing, the following must also be imported: -If wifi-ip-assignment = “Static: wifi-ipv4-address, wifi-ipv4-prefix-length -Required in all cases: wifi-ssid, wifi-security, wifi-proxy-enabled |
| 〇 | 〇 | IP address Setting ID: wifi-ipv4-address | Type: String Default: “192.168.1.128” | ^(\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5])$ | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-ip-assignment=”Static”. ・When importing, proxy-enabled must also be imported. |
| 〇 | 〇 | Network prefix length Setting ID: wifi-ipv4-prefix-length | Type: Number Default: 24 | 8～32 Step: 1 | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-ip-assignment=”Static”. ・When importing, wifi-ip-assignment must also be imported. |
| 〇 | 〇 | Gateway Setting ID: wifi-ipv4-gateway | Type: String Default: “192.168.1.1” | ^(\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (\d{1,2}|1\d\d|2[0-4]\d|25[0-5])$|^$ | ・It cannot read device setting values. ・it is available when wifi-enabled=”true” and wifi-ip-assignment=”Static”. ・When importing, wifi-ip-assignment must also be imported. |
| 〇 | 〇 | DNS Setting ID: wifi-ipv4-dns-servers | Type: String Default: “8.8.8.8,8.8.4.4” | ^(?:((?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (?:\d{1,2}| 1\d\d|2[0-4]\d|25[0-5]). (?:\d{1,2}|1\d\d|2[0-4]\d| 25[0-5]). (?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])) (?:,((?: \d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (?:\d{1,2}|1\d\d|2[0 -4]\d|25[0-5]). (?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5]). (?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])))?)?$|^$ | ・Up to two entries can be specified. If two, use “,” separator. ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-ip-assignment=”Static”. ・When importing, wifi-ip-assignment must also be imported. |
| 〇 | 〇 | Proxy settings Setting ID: wifi-proxy-enabled | Type: Enum Default: None | “None”: None “Static”: Manual | ・It cannot read device setting values. ・It is available when wifi-enabled=”true”. ・When importing, the following must also be imported: – If wifi-proxy-enabled = “Static” wifi-proxy-host, wifi-proxy-port -Required in all cases: wifi-ssid, wifi-security, wifi-ip-assignment |
| 〇 | 〇 | Proxy hostname Setting ID: wifi-proxy-host | Type: String Default: “proxy.example.com” | ^.+$ | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-proxy-enabled=”Static”. ・When importing, wifi-proxy-enabled must also be imported. |
| 〇 | 〇 | Proxy port Setting ID: wifi-proxy-port | Type: Number Default: 8080 | 1～65535 Step: 1 | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-proxy-enabled=”Static”. ・When importing, wifi-proxy-enabled must also be imported. |
| 〇 | 〇 | Bypass proxy for Setting ID: wifi-proxy-exclusive-list | Type: String Default: “example.com,mycomp. test.com,localhost” | true / false | ・It cannot read device setting values. ・It is available when wifi-enabled=”true” and wifi-proxy-enabled=”Static”. ・When importing, wifi-proxy-enabled must also be imported. |
About
| Setting Item | Type / Default | Parameter Value | Conditions / Notes |
|---|---|---|---|
| Automatic check for software update Setting ID: system-software-update-automatically-check | Type: Boolean Default: false | true / false | N/A |
| Device name Setting ID: device-name | Type: String Default: “” | N/A | If left blank, the setting will not be applied to the device. |
power-saving
| Setting Item | Type / Default | Parameter Value | Conditions / Notes |
|---|---|---|---|
| Power saving Setting ID: power-saving | Type: Enum Default: Off | Off, Low, High | “Off” may increase power consumption. |
| Idle display power off Setting ID: Idle display power off idle-tv-standby | Type: Enum Default: 4h | “15min”: 15 minutes “30min”: 30 minutes “1h”: 1 hour “2h”: 2 hours “4h”: 4 hours “8h”: 8 hours “12h”: 12 hours “24h”: 24 hours “Never”: Never | ・It may increase power consumption when set to the following: “8h”, “12h”, “24h”, “Never” |
| Auto shut-off Setting ID: auto-shut-off-enabled | Type: Boolean Default: true | true / false | N/A |
Developer options
| Setting Item | Type / Default | Parameter Value |
|---|---|---|
| Stay awake Setting ID: stay-awake-enabled | Type: Boolean Default: false | true / false |
Date & time
| Setting Item | Type / Default | Parameter Value |
|---|---|---|
| Set time zone Setting ID: time-zone | Type: Enum Default: GreenwichMeanTime | City code lists |
Language
| Setting Item | Type / Default | Parameter Value |
|---|---|---|
| Language Setting ID: language | Type: Enum Default: en-US | Language code lists |
Remotes & accessories
| Setting Item | Type / Default | Parameter Value |
|---|---|---|
| Bluetooth Setting ID: bluetooth-enabled | Type: Boolean Default: true | true / false |
Pro settings
AC・PC input optimization・Wake-up on signal
| Setting Item | Type / Default | Parameter Value | Conditions / Notes |
|---|---|---|---|
| AC Power On Behavior Setting ID: ac-power-on | Type: Enum Default: Standard | “Standard”: Standard “AlwaysOn”: Always on “AlwaysStandby”: Off | N/A |
| PC input optimization Setting ID: pc-input-optimization-enabled | Type: Boolean Default: false | true / false | N/A |
| Wake-up on signal Setting ID: wake-up-on-signal | Type: Enum Default: Disable | “Disable”: Disable “AlwaysEnabled”: Always enabled “InputChangeOnly”: Input change only “SpecifiedHours”: Specified hours | ・It may increase power consumption when set to the following: “AlwaysEnabled”, “InputChangeOnly”, “SpecifiedHours” ・If wake-up-on-signal is “SpecifiedHours”, When importing, the following must also be imported: – wake-up-on-signal-detect-start-time – wake-up-on-signal-detect-end-time |
| Start Setting ID: wake-up-on-signal-detect-start-time | Type: Time Default: 00:00 | 00:00-23:59 | ・It is available when wake-up-on-signal=”SpecifiedHours”. ・Setting values must satisfy the following relationship: wake-up-on-signal-detect-start-time!=wake-up-on-signal-detect-end-time ・When importing, wake-up-on-signal must also be imported. |
| End Setting ID: wake-up-on-signal-detect-end-time | Type: Time Default: 00:00 | 00:00-23:59 | ・It is available when wake-up-on-signal=”SpecifiedHours”. ・Setting values must satisfy the following relationship: wake-up-on-signal-detect-end-time!=wake-up-on-signal-detect-start-time ・When importing, wake-up-on-signal must also be imported. |
Home key behavior
| Setting Item | Type / Default | Parameter Value | Conditions / Notes |
|---|---|---|---|
| Home key behavior Setting ID: home-key-behavior | Type: Enum Default: Standard | “Standard”: Home menu “Custom”: Web app “Toggle”: Web app/Home menu “Disabled”: Android home app | When importing, the following must also be imported. – If home-key-behavior = “Custom”: custom-home-uri – If home-key-behavior = “Toggle”: custom-home-uri |
| Web app Setting ID: custom-home-uri | Type: String Default: “” | ^.+$ | ・It is available when home-key-behavior=”Custom” and home-key-behavior=”Toggle”. ・When importing, home-key-behavior must also be imported. |
| NTP server Setting ID: ntp-server | Type: String Default: “” | N/A | N/A |
| Start Setting ID: wake-up-on-signal-detect-start-time | Type: Time Default: 00:00 | 00:00-23:59 | ・It is available when wake-up-on-signal=”SpecifiedHours”. ・Setting values must satisfy the following relationship: wake-up-on-signal-detect-start-time!=wake-up-on-signal-detect-end-time ・When importing, wake-up-on-signal must also be imported. |
| End Setting ID: wake-up-on-signal-detect-end-time | Type: Time Default: 00:00 | 00:00-23:59 | ・It is available when wake-up-on-signal=”SpecifiedHours”. ・Setting values must satisfy the following relationship: wake-up-on-signal-detect-end-time!=wake-up-on-signal-detect-start-time ・When importing, wake-up-on-signal must also be imported. |
Pro mode lock
| Setting Item | Type / Default | Parameter Value | Conditions / Notes |
|---|---|---|---|
| Set 4-digit number Setting ID: pro-mode-lock | Type: String Default: Standard | ^(?:(?!0000$)\d{4}|)$|^$ | Number (excluding 0000). If not used, leave blank. |
| Charge USB during Standby mode / Networked standby mode Setting ID: charge-usb-during-standby-enabled | Type: Boolean Default: false | true / false | ・It is available when home-key-behavior=”Custom” and home-key-behavior=”Toggle”. ・When importing, home-key-behavior must also be imported. |
| NTP server Setting ID: ntp-server | Type: String Default: “” | N/A | “true” may increase power consumption. |
USB drive auto run
| Setting Item | Type / Default | Parameter Value |
|---|---|---|
| Import settings Setting ID: import-enabled | Type: Boolean Default: false | true / false |
| Install BPK Setting ID: install-bpk-enabled | Type: Boolean Default: false | true / false |
| Launch web app Setting ID: launch-web-app-enabled | Type: Boolean Default: false | true / false |
| Install web app Setting ID: web-apps-installation-enabled | Type: Boolean Default: false | true / false |
| Font Scale Setting ID: font-scale | Type: Number Default: 1 | 0.25～5 Step: 0.01 |
Initial input source
| Setting Item | Type / Default | Parameter Value | Conditions / Notes |
|---|---|---|---|
| Initial input source Setting ID: initial-input-source | Type: Enum Default: Default | “Default”: Default “ExternalInput”: External input “StartupApp”: Startup app “AndroidApps”: Android app | When importing, the following must also be imported: – If initial-input-source = “ExternalInput”: initial-input-source-external-input – If initial-input-source = “StartupApp”: initial-input-source-startup-app-uri – If initial-input-source = “AndroidApps”: initial-input-source-android-app-package, initial-input-source-android-app-activity |
| External input Setting ID: initial-input-source-external-input | Type: Enum Default: hdmi1 | “hdmi1”: HDMI 1 “hdmi2”: HDMI 2 “hdmi3”: HDMI 3 “hdmi4”: HDMI 4 “video1”: AV | ・It is available when initial-input-source=”ExternalInput”. ・When importing, Initial input source must also be imported. |
| Set URI of startup app Setting ID: initial-input-source-startup-app-uri | Type: String Default: “” | ^.+$ | ・It is available when initial-input-source=”StartupApp”. ・When importing, initial-input-source must also be imported. |
| Package name Setting ID: initial-input-source-android-app-package | Type: String Default: “” | ^.+$ | ・It is available when initial-input-source=”AndroidApps” ・When importing, initial-input-source must also be imported. |
| Activity name Setting ID: initial-input-source-android-app-activity | Type: String Default: “” | ^.+$ | ・It is available when initial-input-source=”AndroidApps” ・When importing, Iinitial-input-source must also be imported. |
| Intent data Setting ID: initial-input-source-android-app- intent-data | Type: String Default: “” | ^.+$ | ・It is available when initial-input-source=”AndroidApps” ・When importing, initial-input-source must also be imported. |
| Intent extra key Setting ID: initial-input-source-android-app- intent-extra-key | Type: String Default: “” | ^.+$ | ・It is available when initial-input-source=”AndroidApps” ・When importing, initial-input-source must also be imported. |
| Intent extra value Setting ID: initial-input-source-android-app- intent-extra-value | Type: String Default: “” | ^.+$ | ・It is available when initial-input-source=”AndroidApps” ・When importing, initial-input-source must also be imported. |
Power Scheduling
| Setting Item | Type / Default | Parameter Value | Conditions / Notes |
|---|---|---|---|
| Power Scheduling Setting ID: power-scheduling | Type: Enum Default: Off | “Daily”: Daily “Weekly”: Weekly “Off”: Off | When importing, the following must also be imported: – If power-scheduling = “Daily”: power-scheduling-on-time, power-scheduling-off-time – If power-scheduling = “Weekly”: power-scheduling-on-time, power-scheduling-off-time, power-scheduling-weekly |
| Power On Setting ID: power-scheduling-on-time | Type: Time Default: hdmi1 | 00:00~23:59 | ・It is available when power-scheduling=”Daily” and power-scheduling=”Weekly”. ・Setting values must satisfy the following relationship: power-scheduling- on-time!=power-scheduling-off-time ・When importing, power-scheduling must also be imported. |
| Power Off Setting ID: power-scheduling-off-time | Type: String Default: 00:00 | 00:00~23:59 | ・It is available when power-scheduling=”Daily” and power-scheduling=”Weekly”. ・Setting values must satisfy the following relationship: power-scheduling-off-time!=power-scheduling-on-time ・When importing, power-scheduling must also be imported. |
| Weekly Setting ID: power-scheduling-weekly | Type: Week Default: “” | Multiple select possible | ・It is available when power-scheduling=”Weekly”. ・At least one day of the week must be selected. ・When importing, power-scheduling must also be imported. |
Periodic restart
| Setting Item | Type / Default | Parameter Value | Conditions / Notes |
|---|---|---|---|
| Periodic restart Setting ID: periodic-restart | Type: Enum Default: Off | “Daily”: Daily “Weekly”: Weekly “Off”: Off | When importing, the following must also be imported: – If periodic-restart = “Daily”: periodic-restart-time, periodic-restart-force – If periodic-restart = “Weekly”: periodic-restart-time, periodic-restart-weekly, periodic-restart-force |
| Time Setting ID: periodic-restart-time | Type: Time Default: hdmi1 | 00:00~23:59 | ・・It is available when power-scheduling=”Daily” and power-scheduling=”Weekly”. ・Setting values must satisfy the following relationship: power-scheduling- on-time!=power-scheduling-off-time ・When importing, power-scheduling must also be imported. |
| Weekly Setting ID: periodic-restart-weekly | Type: Week Default: “” | Multiple select possible | ・It is available when periodic-restart=”Weekly”. ・When importing, periodic-restart must also be imported. |
| Forced restart while display is on Setting ID: periodic-restart-force | Type: Boolean Default: false | Multiple select possible | ・It is available when periodic-restart=”Daily”. ・At least one day of the week must be selected. ・When importing, periodic-restart must also be imported. |
Display/Remote controls
| Setting Item | Type / Default | Parameter Value |
|---|---|---|
| Display control Setting ID: display-key-control-enabled | Type: Boolean Default: true | true / false |
| IR remote control Setting ID: ir-remote-control-enabled | Type: Boolean Default: true | true / false |
| Bluetooth Remote Control Setting ID: bluetooth-remote-control-enabled | Type: Boolean Default: true | true / false |
External Inputs Restriction
| Setting Item | Type / Default | Parameter Value |
|---|---|---|
| HDMI 1 Setting ID: external-input-restriction-hdmi1 | Type: Enum Default: UseWithLabels | “UseWithLabels”: Use with labels “UseWithoutLabels”: Use without labels “NotUse”: Not use |
| HDMI 2 Setting ID: external-input-restriction-hdmi2 | Type: Enum Default: UseWithLabels | “UseWithLabels”: Use with labels “UseWithoutLabels”: Use without labels “NotUse”: Not use |
| HDMI 3 Setting ID: external-input-restriction-hdmi3 | Type: Enum Default: UseWithLabels | “UseWithLabels”: Use with labels “UseWithoutLabels”: Use without labels “NotUse”: Not use |
| HDMI 4 Setting ID: external-input-restriction-hdmi4 | Type: Enum Default: UseWithLabels | “UseWithLabels”: Use with labels “UseWithoutLabels”: Use without labels “NotUse”: Not use |
| Video 1 Setting ID: external-input-restriction-video1 | Type: Enum Default: UseWithLabels | “UseWithLabels”: Use with labels “UseWithoutLabels”: Use without labels “NotUse”: Not use |
| Video 2 Setting ID: external-input-restriction-video2 | Type: Enum Default: UseWithLabels | “UseWithLabels”: Use with labels “UseWithoutLabels”: Use without labels “NotUse”: Not use |
App
| Setting Item | Type / Default | Parameter Value | Conditions / Notes |
|---|---|---|---|
| Apps Setting ID: enabled-apps | Type: Enabled-apps Default: packageName:com.sony.dtv.b2b. hotelmode/com.sony.dtv.b2b. hotellanguage.HotelLanguageActivity appName: Language availableValues: enabled,disabled value: enabled packageName: com.google.android.apps. mediashell appName: Chromecast built-in availableValues: enabled,disabled value: enabled | “enabled”: Enable “limited-enabled”: Enable (Limited) “disabled”: Disable | ・For additionally installed apps, you can set them to “Enabled,” “Restricted Enabled,” or “Disabled.” ・Apps installed via Sony’s Cloud Service are enabled by default, while apps installed by other methods are disabled by default. ・In the case of “Restricted Enabled,” the app’s internal data will be erased when it is turned off (disabled). Note: This setting can only be changed by exporting it, updating the “value”, and re-importing it. |