Professional Displays Knowledge Center

Setting Specs  (BZ40P / BZ35P / BZ30P)

  1. Home
  2. Interface for control
  3. Cloud API
  4. Setting Specs  (BZ40P / BZ35P / BZ30P)

Target model
 BZ40P, BZ35P, BZ30P *10-digit software versions (e.g., 114.101.260.1)
Documentation
document Version: 2.0.1, schemaVersion: 2.0.1

Settings

RS232C control

Setting / IDType / Default
SetRS232C control
Setting ID: rs232c-control		Type: Boolean
Default: true

HDMI

X: Enter HDMI input number (1～４)

Setting / IDType / DefaultParameter Value
Content type HDMI
Setting ID: target-hdmiX-content-type		Type: Enum
Default: Video		“Video”: Video/Images
“Game”: Game
“PC”: PC

Prioritize HDMI signal information

Setting / IDType / DefaultParameter ValueNotes
Prioritize HDMI
signal information
Setting ID: content-mode-info-sync-hdmiX		Type: Boolean
Default: true		true / false・”true”: the content type for external input takes priority.
・”false”: the content type can be manually changed.

Picture mode

Setting / IDType / DefaultParameter Value
Picture mode (Video)
Setting ID: picture-common-video-picture-mode		Type: Enum
Default: Standard		“Vivid”: Vivid
“Standard”: Standard
“Professional”: Professional
“Photo”: Photo
Picture mode (Game)
Setting ID: picture-common-game-picture-mode		Type: Enum
Default: StandardGame		“StandardGame”: Standard (Game)
Picture mode (PC)
Setting ID: picture-common-pc-picture-mode		Type: Enum
Default: StandardPC		“StandardPC”: Standard (PC)

Auto adjust according to ambient light

Setting IDType / DefaultParameter Value
Auto adjust according
to ambient light
Setting ID: sensor-auto-adjustment		Type: Boolean
Default: true		true / false

Brightness

Setting / IDType / DefaultParameter ValueConstraints
Brightness (Photo)
Setting ID: picture-common-photo-brightness		Type: Number
Default: 35		0～50It is available when the setting values are as follows:
power-saving=”Off”
power-saving=”Low”
Brightness (Professional)
Setting ID: picture-common-professional-brightness		Type: Number
Default: 7		0～50It is available when the setting values are as follows:
power-saving=”Off”
power-saving=”Low”
Brightness (Standard)
Setting ID: picture-common-standard-brightness		Type: Number
Default: 35		0～50It is available when the setting values are as follows:
power-saving=”Off”
power-saving=”Low”
Brightness (Standard Game)
Setting ID: picture-common-standardgame-brightness		Type: Number
Default: 30		0～50It is available when the setting values are as follows:
power-saving=”Off”
power-saving=”Low”
Brightness (Standard PC)
Setting ID: picture-common-standardpc-brightness		Type: Number
Default: 30		0～50It is available when the setting values are as follows:
power-saving=”Off”
power-saving=”Low”
Brightness (Vivid)
Setting ID: picture-common-standardpc-brightness		Type: Number
Default: 50		0～50It is available when the setting values are as follows:
power-saving=”Off”
power-saving=”Low”

Network & internet

Ethernet

Setting / IDType / DefaultParameter ValueConstraints
IP settings
Setting ID: ip-assignment		Type: Enum
Default: DHCP		“DHCP”: DHCP
“Static”: Static		When importing, the following must also be imported:
-if ip-assignment = “Static”
ipv4-address, ipv4-prefix-length, ipv4-gateway, ipv4-dns-servers
-Required in all cases:
proxy-enabled
IP address
Setting ID: ipv4-address		Type: String
Default: “192.168.1.128”		^(\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\.(\d{1,2}|1\d\d|2[0-
4]\d|25[0-5])\.(\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\.
(\d{1,2}|1\d\d|2[0-4]\d|25[0-5])$		・It is available when ip-assignment=”Static”
・When importing, ip-assignment must also be imported.
Network prefix length
Setting ID: ipv4-prefix-length		Type: Number
Default: 24		0～32
Step: 1		・It is available when ip-assignment=”Static”
・When importing, ip-assignment must also be imported.
Gateway（ipv4）
Setting ID: ipv4-gateway		Type: String
Default: “192.168.1.1”		^(\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\.(\d{1,2}|1\d\d|2[0-
4]\d|25[0-5])\.(\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\.
(\d{1,2}|1\d\d|2[0-4]\d|25[0-5])$|^$ 		・It is available when ip-assignment=”Static”
・When importing , ip-assignment must also be imported.
DNS
Setting ID: ipv4-dns-servers		Type: String
Default: “8.8.8.8,8.8.4.4”		^(?:((?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])(?:\d{1,2}|1\d\d|
2[0-4]\d|25[0-5])\.(?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\.
(?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5]))(?:,((?:\d{1,2}|1\d\d|
2[0-4]\d|25[0-5])\.(?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\.
(?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\.(?:\d{1,2}|1\d\d|2[0-
4]\d|25[0-5])))?)?$|^$		・Up to two entries can be specified. If two, use “,” separator.
・It is available when ip-assignment=”Static”
・When importing, ip-assignment must also be imported.
Proxy settings
Setting ID: proxy-enabled		Type: Enum
Default: None		“None”: None
“Static”: Manual		・It cannot read device setting values.
・It is available when proxy-enabled=”Static”.
・When importing, the following must also be imported.
– If proxy-enabled = “Static”
proxy-host, proxy-port
– If proxy-enabled = “Static”
proxy-exclusive-list
Proxy hostname
Setting ID: proxy-host		Type: String
Default: “proxy.example.com”		^.+$・It is available when proxy-enabled=”Static”.
・When importing this, ip-assignment must also be imported.
Proxy port
Setting ID: proxy-port		Type: Number
Default: 8080		1～65535
Step: 1		・It is available when proxy enabled=”Static”.
・When importing, ip-assignment must also be imported.
Bypass proxy for
Setting ID: proxy-exclusive-list		Type: String
Default: “example.com,mycomp.
test.com,localhost”		ー・It is available when proxy enabled=”Static”.
・When importing, ip-assignment must also be imported.

Wi-Fi

Setting / IDType / DefaultParameter ValueConstraints
Wi-Fi
Setting ID: wifi-enabled		Type: Boolean
Default:false		true / falseN/A
Network name
Setting ID: wifi-ssid		Type: String
Default:””		0～32・It cannot read device setting values.
・If wifi-enabled=”true”, when importing this setting item,
the following must also be imported:
-wifi-security, wifi-ip-assignment, wifi-proxy-enabled
Security
Setting ID: wifi-security		Type: Enum
Default: None		“None”: None
“Wep”: WEP
“Wpa”: WPA/WPA2 PSK		・It cannot read device setting values.
・If wifi-enabled=”true”, when importing this setting item,
the following must also be imported:
-If wifi-security = “Wep”: wifi-wep-value
-if wifi-security = “Wpa”: wifi-wpa-value
-Required in all cases: wifi-ssid, wifi-ip-assignment, wifi-proxy-enabled
Password (wifi-wep)
Setting ID: wifi-wep-value		Type: Password
Default: “”		^[\x20-\x7E]+$・It cannot read device setting values.
・It is available when wifi-enabled=”true” and wifi-security=”Wep”.
・When importing, wifi-security must also be imported.
Password (wifi-wpa)
Setting ID: wifi-wpa-value		Type: Password
Default: “”		8～63
Format: (Regular expression)		・It cannot read device setting values.
・It is available when wifi-enabled=”true” and
wifi-security=”Wpa”.
・When importing this setting item, wifi-security must also be imported.
Connect
Setting ID: wifi-connected		Type: Boolean
Default: true		true / false・It cannot read device setting values.
・It is available when wifi-enabled=”true”,
・When importing, the following must also be imported:
wifi-ssid, wifi-security, wifi-ip-assignment, wifi-proxy-enabled
IP settings
Setting ID: wifi-ip-assignment		Type: Enum
Default: DHCP		“DHCP”: DHCP
“Static”: Static		・It cannot read device setting values.
・It is available when wifi-enabled=”true”.
・When importing, the following must also be imported;
-If wifi-ip-assignment = “Static”
wifi-ipv4-address, wifi-ipv4-prefix-length
-Required in all cases:
wifi-ssid, wifi-security, wifi-proxy-enabled
IP address (wifi-ipv4)
Setting ID: wifi-ipv4-address		Type:String
Default: “192.168.1.128”		^(\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\.(\d{1,2}|
1\d\d|2[0-4]\d|25[0-5])\.(\d{1,2}|1\d\d|2[0-
4]\d|25[0-5])\.(\d{1,2}|1\d\d|2[0-4]\d|25[0-
5])$		・It cannot read device setting values.
・It is available when wifi-enabled=”true” and
wifi-ip-assignment=”Static”.
・When importing, wifi-ip-assignment must also be imported.
Network prefix length (wifi-ipv4)
Setting ID: wifi-ipv4-prefix-length		Type:Number
Default: 24		0～32
Step; 1		・It cannot read device setting values.
・It is available when wifi-enabled=”true” and
wifi-ip-assignment=”Static”.
・When importing, wifi-ip-assignment must also be imported.
Gateway（wifi-ipv4）
Setting ID: wifi-ipv4-gateway		Type: String
Default:”192.168.1.1″		^(\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\.(\d{1,2}|
1\d\d|2[0-4]\d|25[0-5])\.(\d{1,2}|1\d\d|2[0-
4]\d|25[0-5])\.(\d{1,2}|1\d\d|2[0-4]\d|25[0-
5])$|^$		・It cannot read device setting values.
・It is available when wifi-enabled=”true” and
wifi-ip-assignment=”Static”.
・When importing, wifi-ip-assignment must also be imported.
DNS（wifi-ipv4）
Setting ID: wifi-ipv4-dns-servers		Type: String
Default: “8.8.8.8,8.8.4.4”		^(?:((?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])\.(?:\d{1,2}|
1\d\d|2[0-4]\d|25[0-5])\.(?:\d{1,2}|1\d\d|
2[0-4]\d|25[0-5])\.(?:\d{1,2}|1\d\d|2[0-4]
\d|25[0-5]))(?:,((?:\d{1,2}|1\d\d|2[04]\d|25
[0-5])\.(?:\d{1,2}|1\d\d|2[04]\d|25[0-5])\.
(?:\d{1,2}|1\d\d|2[04]\d|25[0-5])\.
(?:\d{1,2}|1\d\d|2[0-4]\d|25[0-5])))?)?$|^$		・It cannot read device setting values.
・It is available only when wifi-enabled=”true” and wifi-ip-assignment=”Static”.
・When importing, wifi-ip-assignment must also be imported.
Proxy settings
Setting ID: wifi-proxy-enabled		Type: Enum
Default: None		“None”: None
“Static”: Manual		・It cannot read device setting values.
・It is available when wifi-enabled=”true”.
・When importing, the following must also be imported:
-If wifi-proxy-enabled = “Static”:
wifi-proxy-host, wifi-proxy-port
-Required in all cases:
wifi-ssid, wifi-security, wifi-ip-assignment
Proxy hostname
Setting ID: wifi-proxy-host		Type: String
Default: “proxy.example.com”		^.+$・It cannot read device setting values.
・It is available when wifi-enabled=”true” and
wifi-proxy-enabled=”Static”.
・When importing, wifi-proxy-enabled must also be imported.
Proxy port
Setting ID: wifi-proxy-port		Type: Number
Default: 8080		1～65535・It cannot read device setting values.
・It is available when wifi-enabled=”true” and wifi-proxy-enabled=”Static”.
・When importing, wifi-proxy-enabled must also be imported.
Bypass proxy for
Setting ID: wifi-proxy-exclusive-list		Type: String
Default: “example.com,
mycomp.test.
com,localhost”		1～65535・It cannot read device setting values.
・It is available when the setting values are as
wifi-enabled=”true” and wifi-proxy-enabled=”Static”.
・When importing, wifi-proxy-enabled must also be imported.

IP control

Setting / IDType / DefaultParameter ValueConstraints
Authentication
Setting ID: ip-control-authentication		Type: Enum
Default: Normal		“Normal”: Normal
“None”: None
“PSK”: Pre-Shared Key
“Normal PSK”: Normal and Pre-Shared Key		・The available options, default values, and constraints are determined by the device attributes “targetRegion” and “enforced”, which are contained in the “redda” object returned
by the Cloud API “getDeviceInfo” endpoint.
・Only the following combinations of device attributes are valid.
・Other combinations are not expected in practice:
– targetRegion = “false” AND enforced = “false”
– targetRegion = “true” AND enforced = “true”

*If targetRegion = “true” AND enforced = “true”, this setting functions as a Pre-Shared Key.
In this case, the setting cannot be retrieved or configured, and the Cloud API returns “ID_NOT_FOUND”.
Pre-Shared Key
Setting ID: ip-control-authentication-psk		Type: String
Default: “”		0～20Availability Condition
It is available when the relevant setting values are as follows:
– ip-control-authentication = “PSK”
– ip-control-authentication = “Normal PSK”
Import Dependency
When importing this setting item, ip-control-authentication must also be imported.
Device Attribute Dependency
The available options, default values, and constraints depend on device attributes
(“targetRegion” and “enforced”)
found in the “redda” object within the device information retrieved via the Cloud API
“getDeviceInfo” endpoint.
Valid Device Attribute Combinations
Only the following combinations of device attributes are valid:
– targetRegion = “false” AND enforced = “false”
– targetRegion = “true” AND enforced = “true”
Operational Note
For devices with targetRegion = “true” AND enforced = “true”,
the character count must be between 16 and 20.
Simple IP control
Setting ID: simple-ip-control-enabled		Type: Boolean
Default: false		true / false・If set to “true”, it may use more power than the default configuration.
・When set to true, energy-modes will automatically be set to “Increased”.
Control4®
Setting ID: control4-enabled		Type: Boolean
Default: false		true / falseWhen set to true, energy-modes will automatically be set to “Increased”.
Control remotely
Setting ID: remote-device-control-remotely		Type: Boolean
Default: false		[enforced=false]true
[targetRegion=true and enforced=true]false		・The available options, default values, and constraints are determined
by device attributes “targetRegion” and “enforced” in the “redda” object
within the device information returned by the Cloud API “getDeviceInfo” endpoint.
・Only the following combinations of device attributes are valid:
targetRegion = false AND enforced = false
targetRegion = true AND enforced = true

About

Setting / IDType / DefaultParameter ValueConstraints
Automatic check for software update
Setting ID: system-software-update-automatically-check		Type: Boolean
Default: false		true / falseN/A
Device name
Setting ID: device-name		Type: String
Default: “”		0～512If left blank, the setting will not be applied to the device.

Power

Setting / IDType / DefaultParameter ValueConstraints
Energy Modes
Setting ID: energy-modes		Type: Enum
Default: Low		“Low”: Low
“Optimized”: Optimized
“Increased”: Increased		Power Consumption
It may increase power consumption when set to “Optimized” or “Increased”.
Availability
・It is available only when energy-modes-enabled=”true”.
Network Connectivity While Display Is Powered Off
・If energy-modes is set to “Low” or “Optimized”,
network connectivity is not available while the display is powered off.
Recommendation for Remote Management
If you plan to use remote management features such as the RMS Cloud API
after provisioning, set energy-modes to “Increased”.
Limitations for Additionally Installed Apps
・Even when energy-modes is set to “Increased”, additionally
installed apps cannot establish network connectivity while the display is powered off.
・To allow network connectivity for additionally installed apps while the display is
powered off, setenergy-modes-enabled (Pro settings) to “false”.
・When energy-modes-enabled (Pro settings) is set to “false”,
energy-modes value has no effect.
Power saving
Setting ID: power-saving		Type: Enum
Default: Off		“Off”: Off
“Low”: Low
“High”: High		It may increase power consumption when set to “Off”.
Shut-off when inactive
Setting ID: auto-shut-off-when-inactive		Type: Enum
Default: 20minutes		“15minutes”: 15 minutes
“20minutes”: 20 minutes
“30minutes”: 30 minutes
“1hour”: 1 hour
“2hours”: 2 hours
“3hours”: 3 hours
“4hours”: 4 hours
“8hours”: 8 hours
“12hours”: 12 hours
“24hours”: 24 hours
“Never”: Never		・It may increase power consumption compared to the default configuration
when set to the following values:
“30minutes”, “1hour”, “2hours”, “3hours”, “4hours”,
“8hours”, “12hours”, “24hours”, “Never”.
・The setting values must satisfy the following relationship:
auto-shut-off-when-inactive <= auto-shut-off-when-watching
Shut-off when watching
Setting ID: auto-shut-off-when-watching		Type: Enum
Default: 4hours		“15minutes”: 15 minutes
“20minutes”: 20 minutes
“30minutes”: 30 minutes
“1hour”: 1 hour
“2hours”: 2 hours
“3hours”: 3 hours
“4hours”: 4 hours
“8hours”: 8 hours
“12hours”: 12 hours
“24hours”: 24 hours
“Never”: Never		・It may increase power consumption when set to the following values:
“8hours”, “12hours”, “24hours”, “Never”.
・Setting values must satisfy the following relationship:
auto-shut-off-when-watching>=auto-shut-off-when-inactive.
Auto shut-off
Setting ID: auto-shut-off-enabled		Type: Boolean
Default: true		true / falseN/A

Developer options

Setting / IDType / DefaultParameter Value
Enable developer options
Setting ID: enable-developer-options		Type: Boolean
Default: false		true / false
Stay awake
Setting ID: stay-awake-enabled		Type: Boolean
Default: false		true / false

Date & time

Setting / IDType / DefaultParameter Value
Set time zone
Setting ID: time-zone		Type: Enum
Default: GreenwichMeanTime		City code lists

Language

Setting / IDType / DefaultParameter Value
Language
Setting ID: language		Type: Enum
Default: false		Language code lists

Remotes & accessories

Setting / IDType / DefaultParameter Value
bluetooth-enabled
Setting ID: bluetooth-enabled		Type: Boolean
Default: true		true / false

Pro settings

AC・Wake-up-on-signal

Setting / IDType / DefaultParameter ValueConstraints
AC power on
Setting ID: ac-power-on		Type: Enum
Default: Standard		“Standard”: Standard
“AlwaysOn”: Always on
“AlwaysStandby”: Off		N/A
Wake-up on signal
Setting ID: wake-up-on-signal		Type: Boolean
Default: false		true / false・When set to true, “Energy Modes” (Basic settings) will automatically be set to “Increased”.
・It may increase power consumption compared to the default configuration when set to “true”.
・When wake-up-on-signal is set to “true”, the following settings must also be imported:
wake-up-on-signal-hdmi1～4
wake-up-on-signal-auto-power-on
wake-up-on-signal-auto-power-off
Auto power-on
Setting ID: wake-up-on-signal-auto-power-on		Type: Boolean
Default: true		true / false・It is available when wake-up-on-signal=”true”.
・When importing, wake-up-on-signal must also be imported.

X: Enter HDMI input number (1～４)

Setting / IDType / DefaultParameter ValueConstraints
HDMI
Setting ID: wake-up-on-signal-hdmiX		Type: Boolean
Default: true		true / false・It is available when wake-up-on-signal=”true”.
・When importing, wake-up-on-signal must also be imported.

Home key behavior

Setting / IDType / DefaultParameter ValueConstraints
Home key behavior
Setting ID: home-key-behavior		Type: Boolean
Default: Standard		“Standard”: Home menu
“Custom”: Web app
“Toggle”: Web app/Home menu
“Disabled”: Android home app		custom-home-uri is required when home-key-behavior is set to
“Custom” or “Toggle”.
Web app
Setting ID: custom-home-uri		Type: String
Default: “”		1～48
Format; ^.+$		・It is available when home-key-behavior is set to “Custom” or “Toggle”.
・When importing , home-key-behavior must also be imported.
NTP server
Setting ID: ntp-server		Type: String
Default: “”		0～2048N/A

Pro mode lock

Setting / IDType / DefaultParameter ValueConstraints
Set 4-digit number (excluding 0000)
Setting ID: pro-mode-lock		Type: String
Default: “”		Format; ^.+$・If not used, leave blank.
Charge USB during Standby mode / Networked standby mode
Setting ID: charge-usb-during-standby-enabled		Type: Boolean
Default: false		true / false・It may increase power consumption when set to “true”.
・When set to “true”, energy-modes will automatically be set to “Increased”.

USB drive auto run

Setting / IDType / DefaultParameter ValueConstraints
Import settings
Setting ID: import-enabled		Type: Boolean
Default: false		true / falseN/A
Install BPK
Setting ID: install-bpk-enabled		Type: Boolean
Default: false		true / falseN/A
Launch web app
Setting ID: launch-web-app-enabled		Type: Boolean
Default: false		true / falseN/A
Install web app
Setting ID: web-apps-installation-enabled		Type: Boolean
Default: false		true / falseN/A
Energy Modes
Setting ID: energy-modes-enabled		Type: Boolean
Default: true		true / false・It may increase power consumption when set to “false”.
・When energy-modes-enabled (Pro settings) is set to “false”,
all apps, including additionally installed apps, can maintain
network connectivity even while the display is powered off.
・Set this to “false” to allow all apps to access the network
while the display is powered off.
Font Scale
Setting ID: font-scale		Type: Number
Default: 1		0.25～5
Sptep: 0.01		N/A

Initial input source

Setting / IDType / DefaultParameter ValueConstraints
Initial input source
Setting ID: initial-input-source		Type: Enum
Default: Default		“Default”: Default
“ExternalInput”: External input
“StartupApp”: Startup app
“AndroidApps”: Android app		When importing, the following must also be imported
depending on the value of initial-input-source:
・ExternalInput
-initial-input-source-external-input
・StartupApp
-initial-input-source-startup-app-uri
・AndroidApps
-initial-input-source-android-app-package
-initial-input-source-android-app-activity
-initial-input-source-android-app-intent-data
-initial-input-source-android-app-intent-extra-key
-initial-input-source-android-app-intent-extra-value
External input
Setting ID: initial-input-source-external-input		Type: Enum
Default: hdmi1		“hdmi1”: HDMI 1
“hdmi2”: HDMI 2
“hdmi3”: HDMI 3
“hdmi4”: HDMI 4		・It is available when initial-input-source=”ExternalInput”
・When importing, initial-input-source must also be imported.
Set URI of startup app
Setting ID: initial-input-source-startup-app-uri		Type: String
Default: “”		0～2048
Format: ^.+$		・It is available when initial-input-source=”StartupApp”
・When importing, initial-input-source must also be imported.
Package name
Setting ID: initial-input-source-android-app-package		Type: String
Default: “”		0～65535
Format: ^.+$		・It is available when initial-input-source=”AndroidApps”
・When importing, initial-input-source must also be imported.
Activity name
Setting ID: initial-input-source-android-app-activity		Type: String
Default: “”		0～65535
Format: ^.+$		・It is available when initial-input-source=”AndroidApps”
・When importing, initial-input-source must also be imported.
Intent data
Setting ID: initial-input-source-android-app-intent-data		Type: String
Default: “”		0～65535
Format: ^.+$		・It is available when initial-input-source=”AndroidApps”
・When importing, initial-input-source must also be imported.
Intent extra key
Setting ID: initial-input-source-android-app-intent-extra-key		Type: String
Default: “”		0～65535
Format: ^.+$		・It is available when initial-input-source=”AndroidApps”
・When importing, initial-input-source must also be imported.
Intent extra value
Setting ID: initial-input-source-android-app-intent-extra-value		Type: String
Default: “”		0～65535
Format: ^.+$		・It is available when the value is as initial-input-source=”AndroidApps”
・When importing, initial-input-source must also be imported.
Timers
Setting ID: timer-settings		Type: Timers-settings
Default: []		type (required)
・Action to execute
“PowerOn” (Turn on power)
“PowerOff” (Turn off power)
“Reboot” (Restart)
“RebootForcibly” (Force restart)
triggerTime (required)
Execution time (HH:MM format)
Example: “00:00” – “23:59”
repeat (required)
・Repeat mode
“Daily” (Every day)
“Weekly” (Specific days of the week)
weekSettings
(required when repeat = “Weekly”)
・Days of the week
“sun” (Sunday)
“mon” (Monday)
“tue” (Tuesday)
“wed” (Wednesday)
“thu” (Thursday)
“fri” (Friday)
“sat” (Saturday)		When using timers, energy-modes will automatically be set to “Increased”.

Display/Remote controls

Setting / IDType / DefaultParameter Value
Display control
Setting ID: display-key-control-enabled		Type: Boolean
Default: true		true / false
IR remote control
Setting ID: ir-remote-control-enabled		Type: Boolean
Default: true		true / false

External Inputs Restriction

X: Enter HDMI input number (1～４)

Setting / IDType / DefaultParameter Value
External Inputs Restriction
Setting ID: external-input-restriction-hdmiX		Type: Enum
Default: UseWithLabels		“UseWithLabels”: Use with labels
“UseWithoutLabels”: Use without labels
“NotUse”: Not use

Apps

Setting / IDType / DefaultParameter ValueConstraints
Apps
Setting ID: enabled-apps		Type: Enabled-apps
Default: enabled-apps Default list		“enabled”: Enable
“limited-enabled”: Enable (Limited)
“disabled”: Disable		App settings
・Additionally installed apps can be set to one of the following states:
– enabled
– limited-enabled
– disabled
Default behavior
・Apps installed via Sony’s Cloud Service are enabled by default.
・Apps installed by other methods are disabled by default.
When set to limited-enabled
– The app can be used with restrictions
– The app’s internal data is erased when the device is turned off
– energy-modes is automatically set to “Increased”