HDMI input specifications
Supported Models
BZ30J, BU40J, BU35J, BU30J, BU40H
Supported Video format
| Resolution | Horizontal Frequency | Vertical Frequency |
|---|---|---|
| 640 × 480 | 31.5 kHz | 60 Hz |
| 800 × 600 | 37.9 kHz | 60 Hz |
| 1024 × 768 | 48.4 kHz | 60 Hz |
| 1152 × 864 | 67.5 kHz | 75 Hz |
| 1280 × 1024 | 64.0 kHz | 60 Hz |
| 1600 × 900 | 55.9 kHz | 60 Hz |
| 1680 × 1050 | 65.3 kHz | 60 Hz |
| 1920 × 1080 ※ | 67.5 kHz | 60 Hz |
※ When a 1080p timing is input, the device recognizes it as video input, not PC. To display PC content via 1080p, configure the following settings:
[Settings] → [Picture & Display] → [Screen Mode]:
- Set [Wide Mode] to [Full]
- Disable [Auto Display Area]
- Set [Display Area] to [+1]
Other video input signals
If supported by your PC, the following signals can also be used.
- 480p / 576p
- 720/24p
- 720p：30 Hz / 50 Hz / 60 Hz
- 1080i：50 Hz / 60 Hz
- 1080/24p
- 1080p：30 Hz / 50 Hz / 60 Hz / 100 Hz / 120 Hz
- 3840 × 2160p：24 Hz / 25 Hz / 30 Hz
- 3840 × 2160p：50 Hz ※2 / 60 Hz ※2 / 100 Hz ※2 / 120 Hz ※2 ※ BU40J only
- 4096 × 2160p：24 Hz ※1
- 4096 × 2160p：50 Hz ※1※2 / 60 Hz ※1※2
※1 If [Wide mode] in the device settings is set to [Normal], 4096 × 2160p input will be displayed as 3840 × 2160p. If set to [Full1] or [Full2], the full area of the 4096 × 2160p input will be displayed.
※2 Depending on the sales area, only HDMI 3 / 4 may be supported.
Note:
Depending on your PC, 1920 × 1080 / 60 Hz output may not be available, or the output signal may differ from the confirmed specification. In such cases, change the PC settings and select another input signal.
Supported types of 4K video signals
Common HDMI Input
| Resolution / Frequency | 8bit | 10bit | 12bit |
|---|---|---|---|
| 3840 × 2160p @ 24 Hz 3840 × 2160p @ 25 Hz 3840 × 2160p @ 30 Hz 4096 × 2160p @ 24 Hz 4096 × 2160p @ 25 Hz 4096 × 2160p @ 30 Hz | YCbCr 4:2:2 YCbCr 4:4:4 RGB | YCbCr 4:2:2 YCbCr 4:4:4 RGB | YCbCr 4:2:2 YCbCr 4:4:4 RGB |
| 3840 × 2160p @ 50 Hz | YCbCr 4:2:0 YCbCr 4:2:2 ※ YCbCr 4:4:4 ※ RGB ※ | YCbCr 4:2:0 ※ | N/A |
| 3840 × 2160p @ 60 Hz 4096 × 2160p @ 50 Hz 4096 × 2160p @ 60 Hz | YCbCr 4:2:2 ※ | YCbCr 4:2:2 ※ | N/A |
| 3840 × 2160p @ 120 Hz | YCbCr 4:2:2 ※ | YCbCr 4:2:2 ※ | N/A |
To display ※ signals, the following conditions are required:
- Connect using a cable that supports 18 Gbps transmission (such as a Premium High Speed HDMI Cable, or the HDMI cable included with PS5 / PS4 Pro or DST-SHV1)
- Enable “Enhanced Format” in the device settings
[Settings] → [External inputs] → [HDMI signal format] → [Enhanced format]
Supported HDMI-CEC commands
To sync the monitor power with STB, connect via HDMI and use CEC commands.
Please enable [BRAVIA Sync Settings] in the Monitor settings before use.
Common to all except EZ20L
- One Touch Play
- Routing Control
- System Standby
- Power Status
- Feature Abort
- One Touch Record
- Timer Programming
- System Information
- Device OSD Name Transfer
- Remote Control Passthrough
- System Audio Control
- Audio Return Channel Control (Tx) for HDMI input(s)