HDMI input specifications
Supported Models
BZ40L, BZ35L, BZ30L
Supported Video format
| Resolution | Horizontal Frequency | Vertical Frequency |
|---|---|---|
| 640 × 480 | 31.5 kHz | 60 Hz |
| 800 × 600 | 37.9 kHz | 60 Hz |
| 1024 × 768 | 48.4 kHz | 60 Hz |
| 1152 × 864 | 67.5 kHz | 75 Hz |
| 1280 × 1024 | 64.0 kHz | 60 Hz |
| 1600 × 900 | 55.9 kHz | 60 Hz |
| 1680 × 1050 | 65.3 kHz | 60 Hz |
| 1920 × 1080 ※ | 67.5 kHz | 60 Hz |
※ When a 1080p timing is input, the device recognizes it as video input, not PC. To display PC content via 1080p, configure the following settings:
[Settings] → [Picture & Display] → [Screen Mode]:
- Set [Wide Mode] to [Full]
- Disable [Auto Display Area]
- Set [Display Area] to [+1]
Other video input signals
If supported by your PC, the following signals can also be used.
- 480p / 576p
- 720p：24 Hz / 30 Hz / 50 Hz / 60 Hz
- 1080i：50 Hz / 60 Hz
- 1080p：24 Hz / 30 Hz / 50 Hz / 60 Hz
- 3840 × 2160p：24 Hz / 25 Hz / 30 Hz / 50 Hz / 60 Hz
- 4096 × 2160p：24 Hz / 50 Hz / 60 Hz
Note:
Depending on your PC, 1920 × 1080 / 60 Hz output may not be available or may not output correctly. In such cases, change the PC settings and select another input signal.
Supported types of 4K video signals
Common HDMI Input
| Resolution / Frequency | 8bit | 10bit | 12bit |
|---|---|---|---|
| 3840 × 2160p @ 24 Hz 3840 × 2160p @ 25 Hz 3840 × 2160p @ 30 Hz 4096 × 2160p @ 24 Hz 4096 × 2160p @ 25 Hz 4096 × 2160p @ 30 Hz | YCbCr 4:2:2 YCbCr 4:4:4 RGB | YCbCr 4:2:2 YCbCr 4:4:4 ※ RGB ※ | YCbCr 4:2:2 YCbCr 4:4:4 ※ RGB ※ |
| 3840 × 2160p @ 50 Hz 3840 × 2160p @ 60 Hz 4096 × 2160p @ 50 Hz 4096 × 2160p @ 60 Hz | YCbCr 4:2:0 YCbCr 4:2:2 ※ YCbCr 4:4:4 ※ RGB ※ | YCbCr 4:2:0 ※ YCbCr 4:2:2 ※ | YCbCr 4:2:0 ※ YCbCr 4:2:2 ※ |
To display ※ signals, the following conditions are required:
- Connect using a cable that supports 18 Gbps transmission (such as a Premium High Speed HDMI Cable, or the HDMI cable included with PS5 / PS4 Pro or DST-SHV1)
- Enable “Enhanced Format” in the device settings
[Settings] → [External inputs] → [HDMI signal format] → [Enhanced format]
Supported HDMI-CEC functions
This model supports the following HDMI-CEC features specified in HDMI.
You can sync the monitor power with an STB connected via HDMI using HDMI-CEC commands.
Please enable [BRAVIA Sync Settings] in the monitor settings before use.
- One Touch Play
- System Standby
- Remote Control Pass Through
- System Audio Control