HDMI input specifications
Supported Models
BZ53L, BZ50L
Supported Video format
| Resolution | Horizontal Frequency | Vertical Frequency |
|---|---|---|
| 640 × 480 | 31.5 kHz | 60 Hz |
| 800 × 600 | 37.9 kHz | 60 Hz |
| 1024 × 768 | 48.4 kHz | 60 Hz |
| 1152 × 864 | 67.5 kHz | 75 Hz |
| 1280 × 1024 | 64.0 kHz | 60 Hz |
| 1600 × 900 | 55.9 kHz | 60 Hz |
| 1680 × 1050 | 65.3 kHz | 60 Hz |
| 1920 × 1080 ※ | 67.5 kHz | 60 Hz |
※ When a 1080p timing is input, the device recognizes it as video input, not PC. To display PC content via 1080p, configure the following settings:
[Settings] → [Picture & Display] → [Screen Mode]:
- Set [Wide Mode] to [Full]
- Disable [Auto Display Area]
- Set [Display Area] to [+1]
Other video input signals
If supported by your PC, the following signals can also be used.
- 480p / 576p
- 720p：24 Hz / 30 Hz / 50 Hz / 60 Hz
- 1080i：50 Hz / 60 Hz
- 1080p：24 Hz / 30 Hz / 50 Hz / 60 Hz / 100 Hz / 120 Hz
- 3840 × 2160p：24 Hz / 25 Hz / 30 Hz / 50 Hz / 60 Hz / 100 Hz / 120 Hz
Note:
Depending on your PC, 1920 × 1080 / 60 Hz output may not be available or may not output correctly. In such cases, change the PC settings and select another input signal.
Supported types of 4K video signals
HDMI 1 / HDMI 2
| Resolution / Frequency | 8bit | 10bit | 12bit |
|---|---|---|---|
| 3840 × 2160p @ 24 Hz 3840 × 2160p @ 25 Hz 3840 × 2160p @ 30 Hz 4096 × 2160p @ 24 Hz 4096 × 2160p @ 25 Hz 4096 × 2160p @ 30 Hz | YCbCr 4:2:2 YCbCr 4:4:4 RGB | YCbCr 4:2:2 YCbCr 4:4:4 ※ RGB ※ | YCbCr 4:2:2 YCbCr 4:4:4 ※ RGB ※ |
| 3840 × 2160p @ 50 Hz 3840 × 2160p @ 60 Hz 4096 × 2160p @ 50 Hz 4096 × 2160p @ 60 Hz | YCbCr 4:2:0 YCbCr 4:2:2 ※ YCbCr 4:4:4 ※ RGB ※ | YCbCr 4:2:0 ※ YCbCr 4:2:2 ※ | YCbCr 4:2:0 ※ YCbCr 4:2:2 ※ |
HDMI 3 / HDMI 4
| Resolution / Frequency | 8bit | 10bit | 12bit |
|---|---|---|---|
| 3840 × 2160p @ 24 Hz 3840 × 2160p @ 25 Hz 3840 × 2160p @ 30 Hz 4096 × 2160p @ 24 Hz 4096 × 2160p @ 25 Hz 4096 × 2160p @ 30 Hz | YCbCr 4:2:2 YCbCr 4:4:4 RGB | YCbCr 4:2:2 YCbCr 4:4:4 ※ RGB ※ | YCbCr 4:2:2 YCbCr 4:4:4 ※ RGB ※ |
| 3840 × 2160p @ 50 Hz 3840 × 2160p @ 60 Hz 4096 × 2160p @ 50 Hz 4096 × 2160p @ 60 Hz | YCbCr 4:2:0 YCbCr 4:2:2 ※ YCbCr 4:4:4 ※ RGB ※ | YCbCr 4:2:0 ※ YCbCr 4:2:2 ※ YCbCr 4:4:4 ※ RGB ※ | YCbCr 4:2:0 ※ YCbCr 4:2:2 ※ YCbCr 4:4:4 ※ RGB ※ |
| 3840 × 2160p @ 100 Hz 3840 × 2160p @ 120 Hz | YCbCr 4:2:0 ※ YCbCr 4:2:2 ※ YCbCr 4:4:4 ※ RGB ※ | YCbCr 4:2:0 ※ YCbCr 4:2:2 ※ YCbCr 4:4:4 ※ RGB ※ | YCbCr 4:2:0 ※ YCbCr 4:2:2 ※ YCbCr 4:4:4 ※ RGB ※ |
To display ※ signals, the following conditions are required:
- Connect using a cable that supports 18 Gbps transmission (such as a Premium High Speed HDMI Cable, or the HDMI cable included with PS5 / PS4 Pro or DST-SHV1)
- Enable “Enhanced Format” in the device settings
[Settings] → [External inputs] → [HDMI signal format] → [Enhanced format]
Supported HDMI-CEC commands
To sync the monitor power with STB, connect via HDMI and use CEC commands.
Please enable [BRAVIA Sync Settings] in the Monitor settings before use.
Common to all except EZ20L
- One Touch Play
- Routing Control
- System Standby
- Power Status
- Feature Abort
- One Touch Record
- Timer Programming
- System Information
- Device OSD Name Transfer
- Remote Control Passthrough
- System Audio Control
- Audio Return Channel Control (Tx) for HDMI input(s)